PE Mechanical Testimonials
PE (Mechanical) Review Course and Workshops
"I passed! I don't think there is any way I would have passed without taking the review classes. Thank you for your time and effort."
Eric Hunter
Passed October 2007
“I made a passing grade and took the fluids and thermal depth. The course notes and information were used extensively during the test and were a big help. I believe the Testmasters course was a huge factor in my passing of this test and would recommend this course to anyone taking the PE exam.”
Jamie, Houston, TX
Passed October 2007
“I would not have passed the exam without this course. Thanks.”
Russ, The Woodlands, TX
Passed October 2007
“Test Masters was awesome, ya’ll are the reason I passed.”
Mike, San Antonio, TX
Passed October 2007
“Thanks very much for the Testmasters service. I attribute much of the success of this past October to the preparation and strategic planning provided by Testmasters.”
Shaun, Southaven, MI
Passed October 2007
“Thank you very much for providing a solid course that helped reinforce my foundation of knowledge which helped me successfully pass my PE test.”
Michael, The Woodlands, TX
Passed October 2007
“Your way of teaching was awesome. I'm sure as I enjoyed your classes, other students should have also enjoyed it. Your hand outs are also helping me in doing my job efficiently.”
Manoj, Houston, TX
Passed October 2007
"I want to THANK you and your staff for organizing these courses! I passed the PE exam! I took the Chemical Engineering section! I found your courses to be very helpful! I must say that I actually looked forward to coming to them each week! Regardless of whether I had passed or not, I found the courses to be effective in refreshing my understanding of the engineering principles!"
Marisa Pierce
"I PASSED! Seventeen years after graduation - I didn't think I had a prayer. Thank you Testmasters!"
Martha, Monett, MO
Passed October 2007
"I want to personally thank you for the valuable classes you organized and taught for the Mechanical PE exam. I took your class and am proud to inform you that you helped me make a passing grade this October 2007. I will not only recommend your classes to my co-workers, I will insist that they take them as they get ready for their exams also."
Gene, Cypress, TX
Passed October 2007
"It was a surprise when the results of my PE exam popped up for the October exam. It was a better surprise to see the word 'PASS'."
Anthony, Sugarland, TX
Passed October 2007
"I would like to share the good news with you, I passed the PE (Mechanical - Thermo and Fluids) exam in October. Thank you all for helping me get prepared."
Jeff, Papillion, NE
Passed October 2007
"I wanted to let you know that I passed the PE exam. I would like to thank Test Masters for your superior guidance and efforts."
Tom, San Antonio, TX
Passed October 2007
"I passed! Thank you so much for helping me prepare. I couldn't have done it without your course."
Michael Christen, Houston, TX
Passed April 2007
"I passed the Mechanical PE exam. Thanks to you and your staff for such quality preparation."
Sam, Austin, TX
Passed April 2007
"I passed the Mechanical PE (Thermo/Fluids). If it wasn’t for Test Masters to point me in the right direction I don’t think I would have passed the first time."
David, The Woodlands, TX
Passed April 2007
"Thank the good Lord I passed! I never had HVAC, Vibrations, and Machine Design in college. Your class taught me what I needed to know and I was successful at passing on my first attempt. Thank you very much for all of your help."
Jake, San Antonio, TX
Passed April 2007
"The course was excellent in preparing me for the exam. Without it, I do not feel that I would have been as prepared and most likely would not have passed the exam."
Duane, Phoenix, AZ
Passed April 2007
"I want to say thank you for the quality of the class that you put on. If it wasn’t for Test Masters I would not have passed."
Chris, Katy, TX
Passed April 2007
"This was my 1st attempt at the Mechanical Engineering PE exam with emphasis on Thermodynamics/Fluids. I fortunately passed. I can honestly say that I would have not passed if I did not attend the Test Masters prep-course. You were absolutely right when you said we will pass if you don't mess up on units!"
Joel, Houston, TX
Passed April 2007
"Thank you for your class, not only did it refresh my memory on a lot of dusty engineering but it also impressed upon me how much I needed to sit down and work out a lot of problems before I was uncomfortably surprised at the exam. Thanks again for your help."
Brad, Alvin, TX
PE (Chemical) - Passed April 2007
"I passed on the first attempt, thanks to you and your instructors. No amount of preparation that I did on my own would have generated this result."
Dean, Houston, TX
Passed April 2006
"I want to Thank You from the bottom of my hearth for your great course."
Luciano, Katy, TX
Passed April 2006
"It helped hone and focus the main areas of study, and helped with getting you in that 'study mode'."
Josh, Houston, TX
Passed April 2006
"I PASSED the exam!! I definitely, without any doubt, would not have passed the test without the Test Masters course. Thank you so much for Test Masters helping me achieve my goal of becoming a licensed engineer!!"
Jim, Shreveport, LA
Passed April 2006
"I passed the exam. The course was a life saver."
Carter, Humble, TX
Passed April 2006
"I passed the PE Mechanical Engineering Exam. I attribute your course in helping me pass."
Ana, Bastrop, TX
Passed April 2006
"I just check the website, and I see that I passed! The prep course really helped!"
Alan, Houston, TX
Passed April 2006
"I did pass the PE exam - mechanical. I definitely give your review class much of the credit for my passing."
Kerri, Pearland, TX
Passed April 2006
"I passed the PE [exam]. I really think your class helped me a lot. Without this class, it [would have been] so much harder for me to pass. The notes are really good. I referred to it a lot during the exam."
Li, Houston, TX
Passed April 2006
"The raise, covered parking, new office (no more cubicle) and two letters after my name make your classes worth every penny."
Christopher, San Antonio, TX
Passed April 2006
"I would not have been able to pass without attending the review classes. The notebook was very helpful."
Kevin, Houston, TX
Passed October 2005
"The Test Masters course provided excellent preparation for me. I couldn't have passed the EIT or the PE without Test Masters."
Todd, Madison, AL
Passed October 2005
"I wanted to say that the Test Masters course truly made the difference for me. I spent a lot of money on other study aides, but I found that there is nothing better than the Test Masters course. Period."
Lance, Allen, TX
Passed October 2005
"Thank you all for guiding me through this process. I used the notes provided by your course and the reference manual exclusively. Your course made the difference."
Mark, Houston, TX
Passed October 2005
"This was my first time to take it and felt that the course gave me very good insight into the exam."
Jared, Houston, TX
Passed October 2005
"I can not imagine taking the test without your review course. I have been out of school for 8 years and without your review course it would have taken me a good deal longer to get back up to speed for this exam. I enjoyed your course very much and I know it was the reason I passed the test."
Scott, Houston, TX
Passed October 2005
"I don't think I could have passed the first time with out taking your course. The class was very relevant, notes and sample problems were great; I would recommend it to anyone taking the PE."
Ron, Houston, TX
Passed October 2005
"I found out yesterday that I passed the mechanical exam (machine design depth) with an 87. I think your course was great. A lot of good information of the test itself (what to expect) and an excellent job reviewing the material."
Sean, Brownsboro, TX
Passed October 2005
"Your course helped me go over the top. There were some concepts that I was not clear on or had wrong and your course changed all of that!"
Lillian, Houston, TX
Passed October 2005
"I am very grateful for your help and your support. It was my first time I took the PE exam. Your classes were very subject oriented, and the problems were well chosen. I have only studied your material."
Mohamed, Orlando, FL
Passed October 2005
"Thanks for the class - it was a lifesaver."
Mark, Houston, TX
Passed October 2005
"I passed the Mechanical PE exam with a score of 80. With the quality of instruction, material content, and practical "hands-on" problem working sessions; your course was a primary factor in my exam success as well as assisting me in my career development."
Brent, Houston, TX
"I have passed the PE exam... I selected "Thermal & Fluids" for the PM session. The review course that I took helped me tremendously. I don't think I would be able to pass the exam without taking the course (I did not study at all before I took the review course!)."
Tri, San Antonio, TX
"I passed the test with an 84... I give you guys a lot of credit. I wasn't thrilled about driving to Houston every weekend from Austin, but it was worth it not to have to go through this again in October."
David, Austin, TX
"Thank you guys very much for your help. Your courses were excellent. I passed the Mechanical with the HVAC depth... I know that I could not have done it without your classes."
Sayed, Houston, TX
"I passed... I feel like the class was critical to my passing. I didn't have much time to study, so the class really filled the void and gave a clear "map" of what to study without having to "wander" (and wonder if I'm on the right track) on my own. I took HVAC depth portion of the exam. I will recommend the class to anyone I come across who is contemplating taking the exam. You guys did a great job with the class. Thank you!"
Kirk, Waco, TX
"I was so inspired by the FE course, I took the PE course. Both courses focused on passing the exams. The course materials proved to be my number one source."
Chad, Houston, TX
"Your review course and workshops were well worth the money and time I spent in preparing for the PE (Mechanical) examination. I know that I would not have passed the exam without your course. Your class really made the difference. I can't express enough to you how much your class meant to me."
Doug, Denton, TX
PE (Chemical) Review Course
"I have passed the test. Today on Louisiana's web site I found out that Louisiana has licensed me for chemical engineering. I could not have done it without your review course."
Terry, Shreveport, LA
Passed April 2006
